Standard / Non-Custom Transducers
standard-non-custom-transducers
A special low power unit is available, which operates on 5 VDC and draws 0.7 mA nominal.
/Asset/a1036.jpg
Model P1/P101 Differential or Absolute Pressure Transducer
The Model P1 pressure transducer is designed for use in applications where size, weight, and power consumption are prime considerations. The combination of all stainless steel welded construction and an extremely stable electronic package results in a transducer ideally suited to tough environments.- All Tavis transducers can be supplied for corrosive media applications. Materials used for this purpose are 17-4PH SS, 17-7PH SS and Iconel™. Specify model P101 for this feature.
- Closer tolerances and higher temperature operation may be supplied. Consult factory for special requirements.
- Add 0.5 inches to length for absolute units with ranges less than 5 psia.
Model P4/P104 Differential or Absolute Pressure Transducer
The Model P4 pressure transducer features adjustable zero and full scale. Utilizing all welded construction and extremely stable electronics, this transducer provides highly accurate pressure measurements in harsh environments. The Model P4 is available in absolute and differential pressure models with input to output isolation.- All Tavis transducers can be supplied for corrosive media applications. Materials used for this purpose are 17-4PH SS, 17-7PH SS and Iconel . Specify model P104 for this feature.
- Closer tolerances and higher temperature operation may be supplied. Consult factory for special requirements.
- Add 0.5 inches to length for absolute units with ranges less than 5 psia.
Model P8/P108 Differential or Absolute Pressure Transducer
The Tavis Model P8 transducer is ideally suited to applications requiring very low differential pressure measurements. Available in pressure ranges as low as 0.01 psid, this differential pressure transducer features low power consumption and zero and full scale adjustments. The all welded stainless steel construction and a stable electronics package combine to produce an extremely accurate, but rugged unit.- All Tavis transducers can be supplied for corrosive media applications. Materials used for this purpose are 17-4 PH SS, 17-7 PH SS and Iconel . Specify model P108 for this feature.
- Closer tolerances and higher temperature operation may be supplied. Consult factory for special requirements.
- This unit is also available in a two wire 4 to 20 mA configuration. Add C following model number for this feature.
Model P16C Very Low Differential Pressure Transducer
Typical applications include air conditioning control systems, air flow control measurements, and positive air pressure control systems. This unit is also available with an output proportional to the square root of the measured differential pressure for use in flow measurements.- F.R. denotes Full Rated Range. F.S. denotes Full Scale Output. Additional Ranges available on request. Square Root Output available.
Model P24C High Accuracy Low Pressure Differential Transducer
The Model P24C high accuracy, low differential pressure transducer is designed for applications which demand a high degree of accuracy at extremely low differential pressures. This unit features Tavis Corporation s two wire 4 to 20 mA electronics. A specially designed heater is incorporated to eliminate any errors which may be introduced by ambient temperature variations. /Asset/a1026.jpg Model P24V High Accuracy Low Pressure Differential Transducer
The Model P24V high accuracy, low differential pressure transducer is designed for applications which demand a high degree of accuracy at extremely low differential pressures. A specially designed heater is incorporated to eliminate any errors which may be introduced by ambient temperature variations. /Asset/a1028.jpg Model P25C Differential Gage, Absolute & Vacuum Transducer
The Model P25C pressure transducer provides high accuracy and reliability at a low cost. With a 4 to 20 mA output, the Model P25C is ideal for applications requiring a two wire transducer. /Asset/a1030.jpg Model P25S Simulated Strain Gage Output Transducer
The Model P25S pressure transducer provides high accuracy and reliability at a low cost. The P25S is a variable reluctance transducer with a signal conditioned output of 4 mV/Volt. /Asset/a1032.jpg Model P25VI Voltage Output (Isolated) Transducer
The Model P25VI pressure transducer provides high accuracy and reliability at a low cost. Standard output is 0 to 5 VDC with a 2.5 mA nominal current draw. Signal input is isolated from transducer output.- A special low power unit is available, which operates on 5 VDC and draws 0.7 mA nominal.
Model P25VN Voltage Output (Non-Isolated) Transducer
The Model P25 VN pressure transducer provides high accuracy and reliability at a low cost. With a 0 to 5 VDC output, the instrument has a current draw of 1.5 mA nominal. Input and output negative pins are common. Model P106 Absolute or Sealed Pressure Transducer
Constructed of all corrosion resistant stainless steel, Tavis Model P106 is an extremely accurate high pressure transducer for use in corrosive media applications. Utilizing all welded construction and an extremely stable electronics package, this model provides good, long-term stability, low hysteresis and high accuracy. Adjustable zero, range, and low power consumption are featured. /Asset/a1038.jpg 